Thursday, May 15, 2008 at 10:30 A.M. (EDT)

Cado Fabrications

144 Elm Street
Amesbury, Massachusetts 01913

LASER

AMADA LASMAC LC-1212 AIII 2000 Watt 2.0 kW CNC Pulsar Series Laser, 4' x 8' sheet capacity 50" X-axis travel, 50" Y-axis, and 11.8" Z-axis, FANUC AF 2000 C resonator, serial number 299720009, (2) clamps, coolant cooler, FANUC 160i-L CNC control with remote pulse generator, TORIT DONALSON dust collector, serial number 25440970, mfg 1999.

PRESS BRAKES

CINCINNATI Model # 175CBII x 8', 10' O.A., 8' between housings, palm buttons, 2-axis with 1-axis backgauge 10" max stroke, CINCINNATI CNC pendant control, ISB-PRO light curtains, serial number 50215, mfg 7/97.

CINCINNATI Model # 90 CBII x 6', 8’ O.A. 6' between housings, palm buttons, 2-axis with 1-axis backgauge, 14" max stroke, CINCINNATI CNC pendant control, ISB-PRO light curtains, serial number 52120, mfg 9/2000.

CHICAGO DREIS & KRUMP Model # 68-C, 75 ton x 8' O.A. CNC mechanical press brake, 78" between housings, motorized ram adjustment, HURCO Autobend 5C CNC control with single axis backgauge, serial number L-13393.

CHICAGO DREIS & KRUMP Model # 68-B, 55 ton x 8' O.A. mechanical press brake with air clutch, 78" between housings, ram adjustment, ISB-PRO light curtains, serial number L-16527.

CHICAGO DREIS & KRUMP Model # 68-B, 55 ton x 8' O.A. 2-axis CNC mechanical press brake, 78" between housings ram adjustment, ISB-PRO light curtains, Autogauge CNC 99 control, serial number L20428.

WYSONG 55 Ton x 6' Mechanical Press Brake, 54" between housings, motorized ram adjust Model # 55-4, 3" stroke, serial number PB42-116.

WYSONG 6' x 35 Ton Hydraulic CNC Press Brake, Model # H-3572, 62" between housings, motorized ram adjustment, ISB-PRO light curtains, Autogauge CNC 99 backgauge, s/n H8B13-118.

CHICAGO DREIS & KRUMP 6' x 35 Ton Mechanical Press Brake, with air assist clutch, 62" between housings, motorized ram adjust, ISB-PRO light curtains.

ACCURPRESS 25 Ton x 4' 2-Axis CNC Press Brake Model # 7254, ETS 250 2-axis CNC control, palm buttons, serial number 5259, mfg 12/1999, delivered 2000.

DI-ACRO 17 Ton x 4' Hydra Mechanical Press Brake, with F.O.M.B.G., Model # 14-48-2, serial number 682027468.

Large Assortment of Full Length and Piece Cut Press Brake Dies and Racks.

SHEAR

CINCINNATI 10' x ¼" Mechanical Shear Model # 2CC10, front operated power backgauge, sheet squaring and support arms, (11) hold downs, serial number 42320.

TURRET PUNCHES

AMADA PEGA 304050 CNC Turret Punch, 30 ton capacity, maximum sheet size 39.37" x 100", maximum traverse 39.37" x 50", 1/4" maximum sheet thickness, 58 station turret, (2) 1–25" auto index, AMADA 04PC CNC control, serial number AQ450289, mfg 1996.

AMADA PEGA 304050 King CNC Turret Punch, 30 ton capacity, maximum sheet size 39.37" x 100", maximum traverse 39.37" x 50", 1/4" maximum sheet thickness, 44 station turret, 1 auto index, AMADA FANUC P CNC control, serial number AK450031, mfg 1986.

AMADA PEGA 304040 Queen CNC Turret Punch, 30 ton capacity, maximum sheet size 39.37" x 100", maximum traverse 39.37" x 50", 1/4" maximum sheet thickness, 56 station turret, FANUC P CNC control, serial number AH90116.

AMADA PEGA 304040 Queen CNC Turret Punch, 30 ton capacity, maximum sheet size 39.37" x 100", maximum traverse 39.37" x 50", 1/4" maximum sheet thickness, 56 station turret, FANUC P CNC control, serial number AH440046.

Huge Assortment of Punches and Dies, Cabinets, Complete Full Room.

STRIPPIT Punch and Die Grinder.

HYDRAULIC GAP FRAME PRESSES

UNITED 80 Ton Model # FCP-80 Open Back Side Press, 22" x 18" slide area, 5.9" x 25.19" bolster area, 3.14" slide adjustment, 5.9" slide stroke, 40–75 S.P.M., 12.9" die height, Merlin ISE light curtains, palm buttons, serial number 5080064, mfg 8/1998.

CINCINNATI 75 Ton Hydraulic Gap Frame CNC Press, Model # 75 OBS press, 24" x 36" bed area, 24" x 20" slide area, 8" maximum stroke, CINCINNATI CNC control, BLACK MAX light curtains, serial number 50413, mfg 1997.

UNITED 45 Ton Model # NCP-45, OBS press, 3.1" stroke, 50–100 SPM, 9.4" die height, 35" x 17" bed, 12" x 17" ram, with MERLIN light, serial number N450025, mfg 9/2000.

L&S 50 Ton OBI, 6" stroke, 30" x 18" bolster, 17" S.H., air assist clutch, palm buttons and pull backs, serial number 51804.

ROUSELLE Model # 3 OBI Punch Press, with air assist clutch, serial number 13562 / DA6793.

BLISS Straight Side Mechanical Press, with 36" W x 18-1/2" D Bed.

ROUSSELLE NO. 3 O.B.I. Press.

SHEET METAL TURRET PUNCH

DI-ACRO No. 18 Manual Turret Punch, serial number BE-1190.

PLATE ROLLS

PEXTO Model # 3418H 4' x 16 Ga Initial Pinch Plate Bending Roll, with foot pedal and manual drop end, serial number 579-10-95.

PEXTO 31" x 2" Diameter Initial Pinch Manual Roll.

SAWS

10" BEWO Mitre Cutting Cold Saw, with vise, infeeding and exit conveyor.

9" x 16" W.F. WELLS Horizontal Band Saw, with vise and barstop.

38" POWERMATIC Model # 87 Vertical Band Saw With Tilt Table, welder and grinder, serial number 987286.

PEMSERTERS

(3) HAEGER 618 6 Ton Insertion Presses, with vibratory feeders and controls, serial number 717, 2832 (1994), and NA.

SPOT WELDERS

FRANK BRANDT 125 KVA Press Type Spot Welder, 23" throat, ENTRON updated control, serial number 12999.

BANNER 50 KVA Press Type Spot Welder, 24" throat, ENTRON control, MILLER radiator, serial number 4572.

(2) HANSON Model # APD4-6-15 Press Type Spot Welders, with MILLER Coolmate 3 radiators, serial number 720906 and 720904.

RAYTHEON OB-HEAD Press Type Spot Welder 6" Throat, used on thin stainless steel, ENTRON EN9100 control, serial number 189.

WELDERS

(3) MILLER SYNCROWAVE 250 Tig Welders, with MILLER Coolmate 3 radiator, serial number KK236171 (1999), KK261023 (1999) and LA0- 13916 (2000).

MILLER SYNCROWAVE 250 DX Tig Welder, with MILLER Coolmate 3 radiator and digital read outs, serial number LC269564, mfg 2002.

(2) MILLER MILLERMATIC 250X and 200 Portable Mig Welders, serial number KJJ9211 (1998) and JJ4- 22801

(2) TORIT Fume Collectors, with (2) extraction work stations.

BELT SANDER

TIMESAVER 36" Single Head Wet Belt Sander, with Digital Thickness Selector, air knife dryer, Model # 137-1HDMW, serial number 23703.

Italian Built Stroke Sander (Disassembled).

WILTON 1" Belt Combination Sander.

6" BADGER Belt Sander.

3" BADGER Belt Sander.

BALDOR 8" Double End Pedestal Buffer.

TUMBLER & DEGREASER

RAMPE Double Side Tumbler.

ULTRONIX 38" x 76" Vapor Degreaser, all stainless steel with pneumatic top doors, 48" W x 21" D x 12" H baskets with 1/2 ton electric hoist, mfg 2005.

GRINDERS

CHEVALIER Accugrind 818SP 8" x 18" 3-Axis Hydraulic Surface Grinder, with incremental down feed and dust collector, WALKER permanent magnetic chuck, serial number A6884098.

BOYAR SCHULTZ 612 Hand Feed Surface Grinder, serial number 15838 with dust collector.

(2) 3' D x 8' W x 7' T Down Draft Grinding Booths, with dust collection.

BALDOR 12" Disc Grinder.

MILLING MACHINE

(3) BRIDGEPORT Vertical Knee Mills, 9" x 42" T-slot table, R-8 spindle, J-head, serial numbers 134751, 171229, and NA.

DRILL PRESSES & LATHE

CLAUSING 15" Variable Speed Drill Press.

JET 20" Pedestal Drill Press.

ROCKWELL 20" Pedestal Drill Press.

SOUTHBEND 9" x 32" Centers Engine Lathe, Model # CL644R, inch threads.

RACKS

(35) Sections 2 Level High Heavy Duty Pallet Racking.

(14) Sections 2 Level High Light Duty Pallet Racking.

PAINT BOOTHS & OVENS

8' W x 10' D x 8' H NEW ENGLAND Gas Fired Paint Bake Oven, 600 degree maximum temperature.

8' W x 10' D x 8' H GEHNRICH Gas Fired Paint Bake Oven, serial number 9593, 600 degree maximum temperature.

(2) 10' W x 10' D x 8' H Paint Booths, with rear exhaust, filters and lighting.

(2) 8' W x 6' D x 6' H Paint Booths, with rear exhaust, filters and lighting.

NORDSON Sure Coat Manual Powder Paint Gun, with cart and pot.

Asst. Wet Paint Pots and Guns.

Large Asst. Paint Racks and Carts.

AIR COMPRESSORS

(7) INGERSOLL-RAND 10 HP Reciprocating Air Compressors, Model # 30T.

(2) ZEKS-THERM Air Dryers.

ALUP Komppress Open Air Dryer.

FORKLIFTS

CLARK 5000 # Capacity Model # CGC25 Propane Forklift, with side shift, 3 stage mast, hard tread tires, serial number G365L-0676-9488FB, mfg 1998.

CLARK 4500 # Capacity Model # GCX25 Propane Forklift, with side shift, 3 stage mast, hard tread tires, serial number GCX2049141, mfg 1992.

BIG JOE Electric Lift.

MISCELLANEOUS

HYDRODRINE FF/18 Lawn Tractor, with plow blade and snow blowing attachment; YARD KING Performance 10/29 Snow Blower; Portable Floor Scale; Fork Extensions; Pallet Jacks; Hand Trucks; Wet/Dry Vacs; Sanders; Chop Saws; Material Racks With Some Material; Motorized Coil DeReels; DI-ACRO Manual Tubebender; Vises; Collets; Cabinets; Drill Boxes; BLACKSMITH No. 60 Notcher; GREENERD No. 2 Arbor Press; Tapping Head; Dump Hoppers; Air Hand Tools; AIRCRAFTER No. 2A Welding Positioners; Welding Vise Grips; Bar Clamps; Weld Wire; Asst. Inspection Including (2) Black Granite Plates; MITUTOYO 24" Digital Height Gauge; DETROIT Pull Tester; Large Asst. of Like New Metal Work Benches; Etc.

OFFICE FURNITURE

Offices Consisting of Photocopier; Printers; Computers; Digital Scales; HEWLETT-PACKARD Design Jet 450C Color Plotter; Conference Room With (12) Matching Chairs; Desks; Credenzas; Book Shelves; Lateral Files; Etc.

VIEW OR DOWNLOAD COMPLETE BROCHURE

DIRECTIONS

From Boston’s Logan Airport: Take 93 N. At Exit 37A take 95 N for approximately 35 miles to Exit 58B. Turn right off ramp to first stop light, turn right. In about one mile, turn left onto Marston, then right onto Oakland. Auction parking is on the right.

HOTEL

Fairfield Inn
(978) 388-3400
35 Clarks Road
Amesbury, MA 01913

TERMS & CONDITIONS OF SALE

These terms are subject to amendments and modifications announced by the Auctioneer at the time of the auction. Any person participating in the auction shall be bound by the following terms and conditions. This brochure is meant only as a guide. The auctioneer does not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any listings specified herein.

All bidders must register immediately upon entering the site. All announcements made on the auction day shall take precedence over previously distributed information.

Anyone outside of the continental United States will be required to wire transfer a minimum deposit of $5,000 to be approved for all non-onsite bidding. All deposits must be received 24 hours before the sale.

Everything will be sold to the highest bidder or bidders for cash in accordance with the Auctioneer’s Terms and Conditions, copies of which are available at the auction site. All bidding and invoicing will be in U.S. Dollars ($), we will accept all currency according to the terms. All purchases must be paid IN FULL on the day of the auction sale. We will accept cash, a cashier’s check, wire transfer and/or a company check accompanied by a bank letter of guarantee. Your bank letter should be similar to the following: "Mr. (Customer Name) is a customer of this bank. This bank will guarantee unqualified payment to Asset Sales, Inc. on the account listed herein up to the amount of $_________. This letter is valid until (date)."

All checks must be made payable to Asset Sales, Inc. All invoices must be checked on the day of the sale as no adjustments will be made thereafter. Purchases that are not removed within the designated time will be considered abandoned. All sales are final, on an "as is - where is," "in place," "with all faults" basis with no conditions or warranties whether expressed, implied, statutory or otherwise, including without limitation, warranties or conditions as to title, description, fitness for purpose, quantity, quality, merchantability, state, condition, location or otherwise. By submitting a bid, the buyer/bidder affirms it has inspected all items before bidding. Purchasers shall be deemed to have relied entirely upon inspections and investigations. Delivery will be made of purchased property only after completion of the sale and payment of invoice. No reselling will be allowed from the premises. All bidders are responsible for all applicable taxes.

No article shall be removed unless paid in full and all articles purchased shall be removed in the time allocated by the auctioneer. No item, no matter how small or how far the purchaser has to travel, may be removed until the close of the auction sale.

Rigging/Removal of sold equipment is the sole responsibility of the buyer and must be completed by the posted date. All small items must be removed within 24 hours of the completion of the sale.

Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. All heavy rigging requiring the use of forklifts, cranes, etc. whether performed by the customer or a rigging company, must present a certificate of insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured.

Asset Sales, Inc. reserves the right to correct any mistakes or typographical errors made by it or on its behalf in any of its announcements or documents, without the ability of deriving right from the corrected announcements.

If you are unable to attend, please contact us to place a proxy bid, or visit our website at www.asset-sales.com.

A 12% Buyer’s Premium will apply to all purchases.

A 15% Buyer’s Premium will apply to all on-line purchases.

WEB SITE: http://www.asset-sales.com
E-MAIL: info@asset-sales.com

CORPORATE HEADQUARTERS
301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079
Toll Free 888.800.4442
Tel 704.821.4315
Fax 704.821.4325

MIDWEST HEADQUARTERS
1985 Hamel Road
Hamel, Minnesota 55340
Tel 612.360.8230
Email dan@asset-sales.com

EUROPEAN HEADQUARTERS
Unit 7
Branxholme Industrial Estate
Bradford Road
Brighouse, West Yorkshire
HD6 4EA, England, UK
Tel 1484.401.906
Fax 1484.715.327
Email peteraml@asset-sales.co.uk

CANADIAN HEADQUARTERS
Asset Sales (Canada) Inc.
2004 Third Street, Box 1093
Rosthern, SK Canada S0K 3R0
Tel 306.232.4446
Fax 306.232.4384
Email gmuller@asset-sales.com